HP 8/24 Brocade Converged Enhanced Ethernet Administrator's Guide 6.3.0 (53-10 - Page 135
Creating a CEE map, Defining a priority group table map, TABLE 22
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Converged Enhanced Ethernet map configuration 9 TABLE 22 CoS 6 7 Default CEE priority table PGID 15.1 15.0 Creating a CEE map Perform the following steps from Privileged EXEC mode to create a CEE map. 1. Enter global configuration mode. switch#configure terminal 2. Create a CEE map. In this example, the name 'test' is used. switch(config)#cee-map test Example of creating a CEE map enter CEE-Map CLI configuration submode. switch:admin>cmsh switch>enable switch#configure terminal Enter configuration commands, one per line. switch(config)#cee-map test switch(config)#end End with CNTL/Z. 3. Enter the copy command to save the running-config file to the startup-config file. switch#copy running-config startup-config Defining a priority group table map Perform the following steps from Privileged EXEC mode to define a priority group table map. 1. Enter global configuration mode. switch#configure terminal 2. Specify the name of the CEE map to define. In this example 'test' is used. switch(config)#cee-map test 3. Define the CEE map with for PGID 0. switch(config-ceemap)#priority-group-table 0 weight 50 pfc 4. Define the CEE map with for PGID 1. switch(config-ceemap)#priority-group-table 1 weight 50 Example of defining a CEE map with a Priority Group Table. PGID PG% PFC 15 - N 0 50 Y 1 50 N Description IPC SAN LAN switch:admin>cmsh switch>enable switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Converged Enhanced Ethernet Administrator's Guide 115 53-1001346-01