HP 8/24 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April - Page 594
ZONE-1030, supportFtp, supportSave, Severity, Message, Probable Cause, Recommended, Action
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 594 highlights
92 ZONE-1030 If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING ZONE-1030 Message , [ZONE-1030], ,, WARNING, , Converting the zone db for PID format change failed. Probable Cause Indicates the current zone database could not be converted to reflect the PID format change. Most likely this is caused by the size of the zone database. Recommended Change the PID format back to its original format. Reduce the size of the zone database. Then you Action can change the PID format to the requested format. Severity WARNING ZONE-1031 Message , [ZONE-1031], ,, ERROR, , Switch is in interop mode. (switch, port) members not supported. Probable Cause Indicates the switch is set to interop mode using the interopMode command. Interop mode does not allow members in the active zone database. Recommended Remove all members from the zone database, or convert them to world wide Action name (WWN) zoning. Severity ERROR ZONE-1032 Message , [ZONE-1032], ,, ERROR, , Domain Max Zone DB size . Probable Cause Indicates the specified domain does not have enough memory for the zone database being committed. Recommended Reduce the size of the zone database and retry the operation. Action Severity ERROR ZONE-1033 Message , [ZONE-1033], ,, ERROR, , Domain Lowest Max Zone DB size. 536 Fabric OS Message Reference 53-1001157-01