HP 8/24 Brocade Fabric OS MIB Reference Guide v6.2.0 (53-1001156-01, April 200 - Page 539
SW MIB Traps, TABLE 13
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 539 highlights
sw Traps 5 Refer to Table 13 for the six traps defined in the SW.MIB, when it occurs, and how to configure the trap, if possible. TABLE 13 SW MIB Traps Name Specific When Configure "swFault 1 1.3.6.1.4.1.1588.2.1.1.1.0.1" on page 524 (not supported) "swSensorScn 2 1.3.6.1.4.1.1588.2.1.1.1.0.2" on page 525 "swFCPortScn 3 1.3.6.1.4.1.1588.2.1.1.1.0.3" on page 526 "swEventTrap 4 1.3.6.1.4.1.1588.2.1.1.1.0.4" on page 527 "swFabricWatchTrap 5 1.3.6.1.4.1.1588.2.1.1.1.0.5" on page 528 "swTrackChangesTrap 6 1.3.6.1.4.1.1588.2.1.1.1.0.6" on page 529 During boot, if diagnostics fail N.A. Obsolete Port changes state Switch event Threshold reached Log in/log out N.A. Always on Refer to the Fabric OS Command Reference and the snmpConfig command for more information. Fabric OS Command: fwConfigure Fabric OS Command: trackChangesSet and trackChangesShow Refer to the Fabric OS Command Reference and the snmpMibCapSet command on how to enable or disable the sending of traps from the various MIBs. The swSsn variable is optional in trap messages. The swGroupName, swGroupType, and swGroupMemPos variables are optional trap messages in v2.6.x. The swGroupName, swGroupType, and swGroupMemPos variables are not supported in Fabric OS v4.x and above. Because Fabric OS releases prior to v5.2.0 used to show the Enterprise Field in the swTraps from the sysObjectID (set using config varaible "snmp.sysObjectID"), the Enterprise field will not always be resolved to "sw". If the sysObjectID is changed by user the Enterprise field in the trap will show some unresolved value. To resolve this issue, beginning with the v5.2.0 release the SNMP configuration variable snmp.trapEnterpriseFlag lets you define the way that the Enterprise field appears. Select either the previous behavior in which the Enterprise field is taken from sysObjectID or the new behavior in which the value in the Enterprise field will alway be "sw". • Set the value of this variable to 0, to use the sysObjectID . • Set the value to 1 to use the fixed enterprise value, "sw" (1.3.6.1.4.1.1588.2.1.1.1.) . Fabric OS MIB Reference 523 53-1001156-01