HP 8/24 Brocade Fabric OS MIB Reference v6.3.0 (53-1001339-01, July 2009) - Page 167
swBeaconOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.18
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 5 This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is read-only) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and higher versions. swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 The password to be used for FTP transfer of files in the download or upload operation. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is read-only) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and higher versions. swBeaconOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.18 Values The current operational status of the switch beacon. Possible values are: • on (1) The LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. • off (2) Each LED is in its regular status, indicating color and state. swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 Values The desired status of the switch beacon. Possible values are: • on (1) The LEDs on the front panel of the switch run alternately from left to right and right to left. Set the color to yellow. • off (2) Set each LED to its regular status, indicating color and state. swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 Values The result of the power-on startup test (POST) diagnostics. Possible values are: • sw-ok (1) The switch is okay. • sw-faulty (2) The switch has experienced an unknown fault. • sw-embedded-port-fault (3) The switch has experienced an embedded port fault. swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.21 The number of sensors inside the switch. The Brocade DCX value is between 1 and 57 (temperature =50, fan = 3, power supply = 4). The value might vary depending on the switch model. For Fabric OS v6.1.0, if no sensor is available, this variable is assigned the value -1. Fabric OS MIB Reference 149 53-1001339-01