HP 8/24 Brocade Fabric Watch Administrator's Guide v6.2.0 (53-1001188-01, Apri - Page 50
RAPI trap, Port log lock, E-mail alert
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
5 Fabric Watch notification An SNMP trap forwards the following information to an SNMP management station: • Name of the element whose counter registered an event • Class, area, and index number of the threshold that the counter crossed • Event type • Value of the counter that exceeded the threshold • State of the element that triggered the alarm • Source of the trap The trap stores event information but does not actively send alerts. Port changes do not generate SNMP traps. You must configure the software to receive trap information from the network device. You must also configure the SNMP agent on the switch to send the trap to the management station using the snmpconfig command. For more information on this command, see the Fabric OS Command Reference. RAPI trap The Remote access Application Programming Interface (RAPI) Trap is a Fabric Watch alarm that actively alerts you to events. After you enable RAPI Trap, Product Name forwards all event information to a designated proxy switch. The host API automatically configures the proxy switch based on the firmware version. The switch forwards the information to the management server and alerts the SAN manager to event activity. Third-party applications that use the Brocade API determine the manner in which the RAPI Trap presents alarms to the user. Port log lock The port log locks to retain detailed information about an event, preventing the information from being overwritten as the log becomes full. This alarm stores event information but does not actively send alerts, which is done automatically when some thresholds are exceeded and an alert is triggered. For more information about locking, unlocking, and clearing the port log, see the Fabric OS Command Reference. E-mail alert E-mail alert sends information about a switch event to a specified e-mail address. E-mail alert can send information about any error from any element, area, and class. The e-mail specifies the threshold and describes the event, much like an error message. Use the fwMailCfg command to configure e-mail alerts. 28 Fabric Watch Administrator's Guide 53-1001188-01