HP 8/24 Brocade Fabric Watch Administrator's Guide v6.3.0 (53-1001342-01, July - Page 65
Appendix B, Default Settings, portThConfig examples, portThConfig, examples
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Threshold configuration 6 TU - Trunk utilization -timebase Configures the threshold value to be measured in one of the following time increments: day, hour, minute, or second. -highth Configures the high threshold on the specified port and area type. Refer to Appendix B, "Default Settings" for the default settings for high and low thresholds and buffers for each class and area. Refer to Appendix C, "portThConfig examples" for port threshold configuration examples for each class and area. -lowth Configures the low threshold on the specified port and area type. Refer to Appendix B, "Default Settings" for the default settings for high and low thresholds and buffers for each class and area. Refer to Appendix C, "portThConfig examples" for port threshold configuration examples for each class and area. -value Specifies the high or low threshold value. -trigger Configures the trigger on the specified port and area type to be above or below the specified threshold settings. Refer to Appendix C, "portThConfig examples" for sample threshold combinations, including triggers. -buffer Configures the buffer setting on the specified port and area type. Refer to Appendix B, "Default Settings" for the default settings for high and low thresholds and buffers for each class and area. -action Specifies the method by which you are notified if the system detects an exceeded threshold limit. Possible values include snmp, raslog, email, or none. --nosave Prevents the configuration changes from being saved persistently. This option allows you to make and view changes without overwriting the saved configuration. When you use --set with the --nosave option and the switch reboots, your changes will be lost. --show Displays the threshold configuration for all configured VE_Ports. ve-port Displays the port type to be configured as a VE_Port. Only a subset of areas can be configured for this port type. -area Displays the area to be configured on a VE_Port. Configurable areas for ports of VE_Port type include the following: util - Port utilization pktLoss - Packet loss ST - State change -current_status Displays the VE_Port's current threshold status. -thresh_level Specifies the threshold level (either default or custom). -action_level Specifies the alarms level (either default or custom). --set Configures the thresholds for monitoring a specified area for all ports of a specified port type. When configuring a threshold, you must specify a port type and an area. port e_port - Configures thresholds for all E_Ports. Fabric Watch Administrator's Guide 41 53-1001342-01