HP 8/24 Brocade Troubleshooting and Diagnostics Guide v6.1.0 (53-1000853-01, J - Page 101
iSCSI Issues, In this Connectivity
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
iSCSI Issues Chapter 11 If you are having problems with the iSCSI FC4-16IP blade connectivity, use the following chapter to troubleshoot before calling your support provider. NOTE The iSCSI blade FC4-16IP is not supported in the Brocade DCX Backbone. In this chapter •Connectivity 87 •Zoning 89 •Authentication 90 Connectivity The following issues deal with the iSCSI FC4-16IP blade connectivity between devices. Symptom iSCSI host reports connection failed. Probable cause and recommended action Network connectivity is having problems. Verify IP address using: portShow ipif /ge Verify IP route using: portShow iproute /ge Ping the PC using: portCmd - -ping /ge -s -d Make corrections to the IP information using the portCfg command. Below is an example to verify if packets can be sent to the destination IP address with maximum wait_time specified. Note that backslash ( \ ) which is used to skip the return character so you can continue the command on the next line without the return character being interpreted by the shell. switch:admin> portcmd --ping 12/ge0 -s 2007:7:30:32:227:138:10:120 -d \ 2007:7:30:32:227:77:0:60 -w 29000 Pinging 2007:7:30:32:227:77:0:60 from ip interface 2007:7:30:32:227:138:10:120 on 12/ge0 with 64 bytes of data Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255 Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=1ms ttl=255 Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255 Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255 Ping Statistics for 2007:7:30:32:227:77:0:60: Packets: Sent = 4, Received = 4, Loss = 0 ( 0 percent loss) Min RTT = 0ms, Max RTT = 1ms Average = 0ms Fabric OS Troubleshooting and Diagnostics Guide 87 53-1000853-01