HP 8/24 Fabric OS MIB Reference v6.4.0 (53-1001768-01, June 2010) - Page 52
ifPhysAddress 1.3.6.1.2.1.2.2.1.6, ifAdminStatus 1.3.6.1.2.1.2.2.1.7, Supports Read only
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
2 ifPhysAddress 1.3.6.1.2.1.2.2.1.6 ifPhysAddress 1.3.6.1.2.1.2.2.1.6 Values The interface's address at the protocol layer immediately below the network layer in the protocol stack. For interfaces that do not have such an address (for example, a serial line), this object should contain an octet string of zero length. • eth0 returns the MAC address for GbE ports • lo returns null • SNMP represents the FC port ID in ASCII hex represenation. For example, 36:35:35:33:36 is equivalent to the decimal value of 65536. To get the decimal value 36-30 = 6; 35-30= 5 and so. To get the FC port ID, convert the decimal into hex (the hex value of 65536 is 01 00 00, where the first two digits are the domain, the next two digits are the area, and the last two digits are the port number). ASCII hex (36:35:35:33:36) => decimal (65536) => hex (01 00 00) ifAdminStatus 1.3.6.1.2.1.2.2.1.7 Values The desired state of the interface. • up (1) • down (2) or • testing (3) Supports Read only, should return same value with ifOperStatus for WAN and FC ports interfaces. NOTE The testing (3) state indicates that no operational packets can be passed. This object is read-only in Fabric OS v4.x and above. ifOperStatus 1.3.6.1.2.1.2.2.1.8 Values The current operational state of the interface. • up (1) • down (2) or • testing (3) • unknown (4) • dormant (5) • notPresent (6) • lowerLayerDown (7) Active tunnels will be up; inactive tunnels will be down (configured but not online). NOTE The testing (3) state indicates that no operational packets can be passed. 34 Fabric OS MIB Reference 53-1001768-01