HP 8/8 Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008) - Page 209
Ficn-1030, Ficn-1031, Ficn-1032, Ficn-1033
View all HP 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
23 FICN-1030 Recommended If there was an unexpected job failure or IO Error associated with this event, please contact your Action vendor's customer support for assistance. Severity ERROR FICN-1030 Message , [FICN-1030], ,, ERROR, , HostDiskIng:FICON Purge received:Path=. Probable Cause An active disk emulation device received a FICON Purge Path from the channel. Recommended If there was an unexpected job failure or IO Error associated with this event, please contact your Action vendor's customer support for assistance. Severity ERROR FICN-1031 Message , [FICN-1031], ,, WARNING, , HostDiskIng:FICON System Reset received on Path=. Probable Cause The FICON channel sent a System Reset to the disk control unit. Recommended No action is required. The MVS system was either set to IPL or performing error recovery. Action Severity WARNING FICN-1032 Message , [FICN-1032], ,, INFO, , HostDiskIng:XRC Read Channel Extender Capabilities detected on Path: . Probable Cause The XRC System Data mover was restarted to discover the capabilities of the channel extension equipment. Recommended No action is required. This is a part of the XRC initialization. Action Severity INFO FICN-1033 Message Probable Cause , [FICN-1033], ,, INFO, , HostEgr:Logical Path Established on Path=. The peer side FICON Control Unit has accepted a logical path establishment command sequence with the FICON channel. Fabric OS Message Reference 157 53-1000600-02