HP 832c (English) Macintosh Connect * User's Guide - C6413-90023 - Page 53
Normal, EconoFast, Print, After you are done printing
View all HP 832c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
3 Creative Printing It isn't absolutely necessary to use the Best print quality, but it gives the best results. You can get terrific results, with faster printing, by using the Normal print quality. If you're in a hurry, use EconoFast print quality. 3 Flip up the OUT tray for a better view of the IN tray. 4 Put the transparencies in your printer with the rough side down and the adhesive strip forward. (You can peel off the adhesive strip after printing.) 5 Slide in the paper adjusters, just as you would for plain paper. Push the IN tray back in and flip the OUT tray down. 6 Click the Print button. Adhesive Strip 6410038 7 Be patient when printing on HP Premium Inkjet Transparency Film or if printing on HP Premium Inkjet Rapid-Dry Transparencies in Best mode. Because the printer uses more ink, lays the colors down more slowly, and allows for a longer drying time between sheets, transparencies take a while to print. After you are done printing: Remove any remaining transparencies from the IN tray and replace them with whatever paper you'll print next. What if the ink never dries or there are cracks in the solid blocks of color? • You might have printed on the wrong side of the transparency. Make sure to put it into the printer rough side down. • You might be trying to print on a transparency that wasn't meant for an inkjet printer. What if the quality isn't what you were expecting? You might not have chosen the right paper type and print quality. Follow the steps in the procedure above, and print the document again. 46