HP 9040mfp HP LaserJet MFP - Analog Fax Accessory 300 Send Fax Driver - Page 66
Setting the fax quality, Standard, Superfine, Setup, Edit Defaults, Fax Quality, Default Settings
UPC - 829160403649
View all HP 9040mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Setting the fax quality The fax quality setting defines the resolution that the MFP uses to send the fax. The following are the available quality settings: ● Standard: 200 x 100 dots per inch (dpi) ● Fine: 200 x 200 dpi ● Superfine: 300 x 300 dpi To set the fax quality, use the following steps: 1. On the Setup tab, click Edit Defaults. 2. Under Fax Quality in the Default Settings dialog box, select the default quality for sending faxes. 3. Click OK. NOTE: To set all of the default information at the same time, select the sender information, notification, cover page, and preview settings and then click OK. 60 Chapter 3 Configuration ENWW
Setting the fax quality
The fax quality setting defines the resolution that the MFP uses to send the fax. The following are the
available quality settings:
●
Standard
: 200 x 100 dots per inch (dpi)
●
Fine
: 200 x 200 dpi
●
Superfine
: 300 x 300 dpi
To set the fax quality, use the following steps:
1.
On the
Setup
tab, click
Edit Defaults
.
2.
Under
Fax Quality
in the
Default Settings
dialog box, select the default quality for sending faxes.
3.
Click
OK
.
NOTE:
To set all of the default information at the same time, select the sender information,
notification, cover page, and preview settings and then click
OK
.
60
Chapter 3
Configuration
ENWW