HP 9040mfp HP LaserJet MFP and Color MFP Products - Configuring Security for M - Page 48
Repeat PJL, Password, Con Devices, View Log, Refresh, Go Back, Security, Disable Direct Ports
UPC - 829160403649
View all HP 9040mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Figure 50: The PJL Password option. 18. Type a password that is any number from 1 to 2147483647, and repeat it in the Repeat PJL Password field. The PJL password protects the default features on the MFP. PJL commands are allowed only when the correct PJL password is included. This also affects PCL and PostScript commands. Note: If you are configuring color MFPs, options for restricting the use of color will appear on the Security page. You should configure these options if you wish to control the costs of color printing. 19. Once you have made your choices, click Configure Devices at the bottom of the page. The View Log page will appear to show the progress. Wait few moments, and click Refresh to see the updated status. When the View Log page shows success, click Go Back to continue. Configuring Final Settings Some of the MFP settings should be configured only by themselves and only at the end of this checklist. Follow these instructions for the final settings: 1. Go to the Security page, and click to select Disable Direct Ports (Figure 51). Figure 51: The Disable Direct Ports option. 2. Click to select the Disable Direct Ports option to the right. HP LaserJet and Color LaserJet MFP Security Checklist 48