HP A6763w Upgrading and Servicing Guide - Page 22
Replacing a Memory Module, memory module with the tab
UPC - 884420938415
View all HP A6763w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Replacing a Memory Module Upgrade the memory in your computer with memory of the same type and speed as the memory originally installed in your computer. 1 Complete the procedure "Removing a Memory Module" on page 17. 2 Open both latches of the memory module socket. WARNING: Handle the memory module with care. Be careful to not touch any memory module contacts. Touching the gold contacts may damage the module. Avoid touching the memory chips. 3 Remove the new memory module from the antistatic packaging. Hold it by its edges only. 4 You can install the memory module in only one position. Match the notch (A) on the memory module with the tab (B) on the memory socket. Push the module carefully and firmly into the slot, ensuring that the latches on both ends snap into place. A B 5 Repeat steps 1 to 4 for the second memory slot, as required. 6 Replace any cabling that was moved. 7 Complete the procedures to replace the optical disc drive. See "Replacing an Optical Disc Drive" on page 11. 18 Upgrading and Servicing Guide