HP A9890A Smart Array 6400 Series Controllers for Integrity Servers User Guide - Page 10
Installing the controller hardware, Before beginning the installation, Preparing the server
UPC - 829160079530
View all HP A9890A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installing the controller hardware In this section Before beginning the installation ...10 Preparing the server ...10 Installing the controller board ...10 Connecting storage devices...11 Before beginning the installation Before beginning the installation procedure, visit the HP website (http://www.hp.com/support) to confirm that you have the latest version of each driver and utility file needed. Compare the version numbers of the files there with those of the same files on the Smart Setup media. Preparing the server Before installing the controller in the server, back up all data. This step is required if you are moving non-arrayed SCSI drives to a Smart Array controller, because data is not preserved during a move between array controllers and non-array controllers. If the server supports hot-pluggable devices, you can install the controller board without any further preparation. To prepare a server that does not support hot-pluggable devices: 1. Close all applications. 2. Power down the server. CAUTION: In systems that use external data storage, be sure that the server is the first unit to be powered down and the last to be powered back up. Taking this precaution ensures that the system does not erroneously mark the drives as failed when the server is powered up. 3. Power down all peripheral devices that are attached to the server. 4. Unplug the AC power cord from the outlet and then from the server. 5. Disconnect all peripheral devices from the server. Installing the controller board WARNING: To reduce the risk of personal injury or damage to the equipment, consult the safety information and user documentation provided with the server before attempting the installation. Many servers are capable of providing energy levels that are considered hazardous and are intended to be serviced only by qualified personnel who have been trained to deal with these hazards. Do not remove enclosures or attempt to bypass any interlocks that may be provided for the purpose of removing these hazardous conditions. Installing the controller hardware 10