HP AM872A#ABA Presario Select 1200 Series Maintenance and Service Guide - Page 46

Index, Return to Removal &amp, Replacement Procedures

Get HP AM872A#ABA - StorageWorks SAN Switch 8/80 Power PDF manuals and user guides
UPC - 884420117797
View all HP AM872A#ABA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Presario 1200 Series Models: 1234, 1235, 1236, 1237, 1238, 1240, 1242, 1250, and 1252 Before You Begin Specifications Parts Catalog Removal Sequence Troubleshooting Battery Operations Product Description Pin Assignments Index 4. Turn the computer over (right side up), pull forward on the display latches to release and open the display assembly. 5. Lift up front end of the palmrest cover with touch pad and remove it from the groove in the chassis. 6. Tilt the palmrest cover with touch pad, allowing it to rest on top of the keyboard, and disconnect the flex cable from the LIF connector on the palmrest cover. CAUTION: When replacing the palmrest cover with touch pad, ensure that the cable is fully inserted into the LIF connector on the system board. If the metal end should come in contact with the keyboard, damage may occur to the computer. To replace the palmrest cover with touch pad, reverse the previous procedures. When replacing the palm rest cover ensure the cable is properly NOTE: routed through the slot on the Upper CPU cover. Return to Removal & Replacement Procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Presario 1200 Series
Models: 1234, 1235, 1236, 1237, 1238, 1240, 1242, 1250, and 1252
Before You Begin
Specifications
Parts Catalog
Removal Sequence
Troubleshooting
Battery Operations
Product Description
Pin Assignments
Index
4. Turn the computer
over (right side up), pull
forward on the display
latches to release and
open the display
assembly.
5. Lift up front end of
the palmrest cover with
touch pad and remove it
from the groove in the
chassis.
6. Tilt the palmrest
cover with touch pad,
allowing it to rest on top
of the keyboard, and
disconnect the flex cable
from the LIF connector
on the palmrest cover.
CAUTION:
When
replacing the
palmrest cover
with touch pad,
ensure that the
cable is fully
inserted into the
LIF connector on
the system board.
If the metal end
should come in
contact with the
keyboard, damage
may occur to the
computer.
To replace the palmrest
cover with touch pad,
reverse the previous
procedures.
NOTE:
When replacing
the palm rest
cover ensure the
cable is properly
routed through
the slot on the
Upper CPU
cover.
Return to Removal &
Replacement Procedures