HP AiO400t HP StorageWorks All-in-One Storage System Quick Start Instructions - Page 4

3 Install the storage system hardware and power on 1.If installing the system in a rack, install the rail kit or tower-to-rack conversion kit by following the instructions provided with your storage system. NOTE: The tower-to-rack conversion kit is not available with the AiO400t. 2. If connecting to the storage system using the direct attach method, connect the following cables to the back panel of the storage system in the following sequence: keyboard, mouse, network cable, monitor cable, and power cable. -orIf connecting to the storage system using either the remote browser or remote desktop method, connect only the network cable and power cable. NOTE: The keyboard, mouse, and monitor are not provided with the HP All-in-One Storage System. 3. Power on the system by pushing the power button on the front panel. Remove the bezel if needed. The system starts and displays the following screen: The installation process takes approximately 10-15 minutes and requires no user interaction. NOTE: If you plan to migrate data from application servers on your network, you can use this time to install the required HP All-in-One Storage System Agent on those servers. For more information, see Step 5 of these instructions. When the HP StorageWorks All-in-One Storage System installation process is complete, the system prompt appears. 4. At the system prompt, enter the default user name and password: user name = administrator password = hpinvent After logging in for the first time, the Welcome screen of the Rapid Startup Wizard opens.