HP All-in-One 200-5250xt Upgrading and Servicing Guide - Page 26
Removing and Replacing a Computer Stand, Before You Begin, Computer Preparation, Tools Needed
View all HP All-in-One 200-5250xt manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Removing and Replacing a Computer Stand 5-10 minutes Before You Begin Observe the following requirements before removing and replacing the computer stand. Tools Needed Flathead screwdriver Phillips screwdriver #2 CAUTION: Static electricity can damage the electronic components inside the computer. Discharge static electricity by touching the metal cage of the computer before touching any internal parts or electronic components. WARNING: Never open the cover with the power cord attached or power applied. You may damage your computer. Avoid touching sharp edges inside the computer. IMPORTANT: Computer features may vary by model. Computer Preparation 1 Remove any media (CD, DVD, and memory cards) from the computer. 2 Press the power button to turn off the computer. 3 Unplug the computer by disconnecting the power cord in back. 4 Unplug all attached cables from the back of the computer. 24 599977-001 - Removing and Replacing a Computer Stand