HP BL25/35/45p HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters User Guide - Page 7

Variable name TargetName TargetIP TargetPort TargetIP2 TargetPort2 InitiatorName InitiatorNetmask InitiatorRoute LAA LUN AuthMethod CHAPUsername Descr ipti on Exam ple Name of the target from which to boot TargetName=iqn.200305.com.hp1510i:disk01 Target IP in aaa.bbb.ccc.ddd TargetIP=10.10.10.20 format Target Port, generally 3260 TargetPort=3260 Secondary TargetIP TargetIP2=10.10.20.20 Secondary Port TargetPort2=3260 Name used for the iSCSI initiator on the booting system. InitiatorName=iqn.client01 IP network mask used by the InitiatorNetmask=255.255.255.0 iSCSI initiator. This value is in dotted decimal format. Default IP route used by the InitiatorRoute=10.10.10.1 iSCSI initiator. This value is in dotted decimal format. Locally Assigned Address LAA=000000000000 (MAC address) used by the iSCSI initiator. This value is specified as 12 hex digits. A value of all zeros indicates that the initiator should use the MAC address assigned to the hardware. Logical Unit Number for the target. Some targets do not start numbering iSCSI target data LUNs at 0. LUN=0 The initiator and target must agree on an authentication method or the iSCSI initiator can not log in to the target. AuthMethod values are "None, CHAP, and MutualCHAP." If CHAP is specified, the target can still select None as the authentication method. If CHAP is specified, CHAPUsername and CHAPSecret also must be specified. If MutualCHAP is specified, CHAPUsername, CHAPSecret and CHAPMSecret also must be specified. AuthMethod=None User name for CHAP authentication. CHAPUsername=iqn. 199105.com.microsoft:comfort.txn.cpqcorp.net Installation and configuration 7