HP BL260c Hard Drive Installation Instructions for HP ProLiant BL260c Generati

HP BL260c - ProLiant - G5 Manual

HP BL260c manual content summary:

  • 1
  • 2
  • 3

Hard Drive
Installation Instructions
for HP ProLiant BL260c Generation 5 Server Blades
Overview
Use these instructions to install up to two SATA hard drives in the
server blade.
Kit contents
Hard drive
This document
Installing a hard drive
WARNING:
To reduce the risk of personal injury from hot
surfaces, allow the drives and the internal system
components to cool before touching them.
To install the component:
1.
Power down the server blade.
2.
Remove the server blade.
3.
Remove the access panel.
4.
Disconnect all hard drive cables from the system board,
if installed.
5.
Remove the hard drive cage/bezel assembly.
6.
Open the hard drive cage.
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Part Number 466520-001
February 2008 (First Edition)