HP BL680c ISS Technology Update, Volume 6 Number 9 - Newsletter - Page 6

ISS Technology Update Volume 6, Number 9 Licensing ports on the Brocade 4/12 SAN Switch for HP c-Class BladeSystem The Brocade 4/12 SAN Switch for HP c-Class BladeSystem is provided with 12 port licenses, two of which are pre-reserved for external ports. This article focuses on port licensing as it relates to the many questions that HP representatives encounter at technical events. Here are two such questions: • Can more than 8 servers be licensed with each Brocade 4/12 SAN switch (Figure 4-1) at the expense of external ports (for example, 10 server ports and 2 external ports)? • Are there any rules determining which bay's ports get licensed (for example, only servers in bays 1 through 8), or can one manually assign licenses to any server port in the enclosure, regardless of bay number? Figure 4-1. Brocade 4GB SAN switch* * This illustration shows 4 SFPs. However, out-of-the-box the Brocade 4/12 SAN switch has 2 SFPs in the left-most slots. We'll share what we know about these licensing questions from both a practical field perspective and a product feature vantage point. Quick answers In addressing the first question, the proposed scenario is permitted. The only requirement is to maintain at least one licensed external port. However, if the configuration contains two HP c-Class Brocade 4/12 SAN Switches side-by-side in a dual path configuration, the servers on the top of the enclosure should use Host Bus Adapter (HBA) port 1 and servers on the bottom should use port 2. This will split the load between the two paths. As for the second question, licenses are granted on a first-request basis; any of the 16 internal ports can request and be granted a license. It is possible to turn off dynamic license allocation in the Fabric OS (FOS) and assign licenses manually if desired, as described in the Command Line Interface (CLI) guide for Brocade FOS. Ultimately, licensing is not dependent on bay numbers. NOTE If more than 11 servers are plugged into the Blade System, all the ports can be automatically assigned to internal servers with no external connections. About port management In the past, Ports On Demand (POD) functionality was static. A preset group of ports was individually enabled per each POD license. In contrast, the new Dynamic Ports On Demand (DPOD) feature does not require predefined port assignment. Port assignment is determined by the discovery of active HBA ports, but is limited to the quantity of purchased ports. 6