HP Brocade 8/12c HP StorageWorks B-series Data Center Fabric Manager Enterpris - Page 29

Closed defect summary Solution When an M-EOS-based switch is used as a seed switch and is attached to an FOS-based switch, the connected end devices are not accurately displayed in the Topology. The device attached to the FOS-based switch is shown without any connection, and the device attached to the M-EOS-based switch is not shown at all. Fixed in DCFM 10.3.0 nl Workaround prior to this version: nl Use the FOS-based switch as the seed switch. M-EOS Element Manager cannot be launched after editing the SNMP values from the Discovery Setup dialog. Fixed in DCFM 10.3.0 nl Workaround prior to this version: nl Delete and then rediscover the fabric. The FCIP tunnel between two HP StorageWorks 400 MP Routers does not appear in the Topology. Fixed in DCFM 10.3.0 When monitoring performance, the I/O flow does not appear for some switches or for GbE ports with one FCIP tunnel. Fixed in DCFM 10.3.0 The Connected Device Property information is not updated when a CNA connected to HP StorageWorks 2408 FCoE Converged Network Switch is down in the Virtual FCoE Ports tab. The Connected Device Property value displays 1 instead of 0. Fixed in DCFM 10.3.0 Unable to download firmware using an external FTP as external FTP server, and SCP server options are not available in the Firmware Management dialog if an external FTP server is selected. Fixed in DCFM 10.3.0 If the HP StorageWorks 2408 FCoE Converged Network Switch is selected from the Connectivity Map, the Product Tree toggles or flickers. Fixed in DCFM 10.3.0 You cannot activate zone config while bad zone config is displayed. Fixed in DCFM 10.3.0 During historical data collection, event logs can grow to several GBs in size and fill the hard drive. Fixed in DCFM 10.3.0 When IFLs are removed from back-to-edge routing, the Topology occasionally appears blank and causes a NULL pointer exception in the Fixed in DCFM 10.3.0 Client log. Access Gateway-based logins are displayed incorrectly in DCFM. Fixed in DCFM 10.3.0 The right-click menu of unoccupied ports in M-EOS-based switches lists CGWL options instead of the correct options. Fixed in DCFM 10.3.0 The local client displays the Master Log correctly, but remote clients display a blank Master Log. Fixed in DCFM 10.3.0 HP StorageWorks Edge Switch 2/12 running firmware 9.9.x is missing from the Topology after migration from EFCM to DCFM; it must be Fixed in DCFM 10.3.0 rediscovered to appear. The Port Picker dialog shows an incorrect port count when switches without an EGM license are selected. nl NOTE: nl All HP switches have this license by default. Fixed in DCFM 10.3.0 Discovery status is inconsistent for VF switches in the fabric when a non-VF switch is discovered as the seed switch. Fixed in DCFM 10.3.0 B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional 29