HP C8907A Setup Guide - Page 8
Connect to the network
UPC - 829160417196
View all HP C8907A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
9 Connect to the network a Highlight the name of your network from the list that appears and then press OK. (If your network is not listed, select Enter a New Network Name (SSID) and enter your Network Name (SSID). Make sure there are no obstructions between the access point and your HP Wireless Dock Base.) b If your network is encrypted, a prompt appears for the WEP key or WPA passphrase. Enter the information using the remote control and the keyboard that appears on your television. See Display keyboard tips at the bottom of this page. c Follow the prompts on the display. If the connection is successful, go to the next step. Display keyboard tips: To Select: Use Arrow keys to highlight, and then press OK. For uppercase: Select ABC For punctuation: Select Symbols When you are finished: Highlight Done, and then press OK. d If your Workgroup name is not MSHOME, you will need to select Workgroup and change the name to match your network.