HP CE914A#BGJ HP LaserJet Pro CP1020 - User Guide - Page 113
Alert message, Description, Recommended action, Cyan Cartridge Very Low, DC Controller Error
View all HP CE914A#BGJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Alert message Cyan Cartridge Very Low DC Controller Error Engine Communication Error Front Access Door Open Fuser Error Description Recommended action The print cartridge is at the estimated end of its useful life. Print quality may decrease. Choose a reminder option or replace print cartridge when quality becomes unacceptable. To ensure optimal print quality, HP recommends replacing the print cartridge at this point. You do not need to replace the print cartridge at this time unless print quality is no longer acceptable. Actual print cartridge life may vary. The product has experienced an internal error. Once an HP print cartridge has reached "very low", HP's Premium Protection Warranty on that print cartridge has ended. All print defects or cartridge failures incurred when an HP supply is used in continue at very low mode will not be considered to be defects in materials or workmanship in the supply under the HP Print Cartridge Warranty Statement. Turn off the product and disconnect the power cable from the product. Wait 30 seconds and then reconnect the power cord and turn on the product. Wait for the product to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Use the power switch to turn on the product. The product experienced an internal communication error. If the message persists, contact HP support. Turn off the product and disconnect the power cable from the product. Wait 30 seconds and then reconnect the power cord and turn on the product. Wait for the product to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Use the power switch to turn on the product. The door is open. The product has experienced an error with the fuser. If the message persists, contact HP support. Close the door. Turn off the product and disconnect the power cable from the product. Wait 30 seconds and then reconnect the power cord and turn on the product. Wait for the product to initialize. If the error continues, turn off the product, disconnect the power cable, wait at least 25 minutes, and then reconnect the power cable and turn on the product. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Use the power switch to turn on the product. If the message persists, contact HP support. ENWW Status alert messages 101