HP Chromebook 11 G8 Education Edition Maintenance and Service Guide - Page 37

Battery, that covers the battery cable and connector.

Page 37 highlights

6. Remove the speakers (4). Reverse this procedure to install the speakers. Battery Table 5-4 Battery spare part information Description Battery (2-cell, 47.36-WHr, 6.15-AHr, Li-ion; includes cable) Battery bracket Battery tape Spare part number L75783-005 L98587-001 L14905-001 Before removing the battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 23). 5. Remove the speakers (see Speakers on page 30). Remove the battery: 1. Release the shielding (1) that covers the battery cable and connector. 2. Disconnect the battery cable (2) from the system board. 3. Remove the two Phillips M2.0×4.2 screws (3) that secure the battery to the bottom cover. Component replacement procedures 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67

6.
Remove the speakers
(4)
.
Reverse this procedure to install the speakers.
Battery
Table 5-4
Battery spare part information
Description
Spare part number
Battery (2-cell, 47.36-WHr, 6.15-AHr, Li-ion; includes cable)
L75783-005
Battery bracket
L98587-001
Battery tape
L14905-001
Before removing the battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
23
).
5.
Remove the speakers (see
Speakers
on page
30
).
Remove the battery:
1.
Release the shielding
(1)
that covers the battery cable and connector.
2.
Disconnect the battery cable
(2)
from the system board.
3.
Remove the two Phillips M2.0×4.2 screws
(3)
that secure the battery to the bottom cover.
Component replacement procedures
31