HP Cisco MDS 9020 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rele - Page 44

Caveats Send documentation comments to [email protected] Workaround: This issue is resolved. • CSCsz84022 Symptom: The TPC application cannot discover the MDS 9509 switch when it is connected to an MDS 9020 switch. Workaround: This issue is resolved. • CSCsz95999 Symptom: A kernel failure in the Mgmt0 driver caused the MDS 9222i switch to reboot Workaround: This issue is resolved. • CSCta08796 Symptom: A memory leak caused the port manager to fail and put the ports in a hardware failure state. Workaround: This issue is resolved. • CSCta15575 Symptom: The SystemName property on the CIM Server is returning the wrong values for N port and F port. Workaround: This issue is resolved. • CSCta28642 Symptom: SNMP should gracefully handle timeouts caused by port initialization. Workaround: This issue is resolved. • CSCta34629 Symptom: The system manager core server does not clean up the core files on the MDS 9513 switch. Workaround: This issue is resolved. • CSCtb29470 Symptom: A large sequence number causes Performance Manager in Web Client to not function properly. Workaround: This issue is resolved. • CSCtb62488 Symptom: Port flaps during a zone set activation cause the zone set to get stuck with the status: Activation in progress. Workaround: This issue is resolved. • CSCsw87910 Symptom: When running Cisco MDS Release SAN-OS 3.3(2) with DPVM enabled, if a link flaps for a end device with DPVM enabled, you might see the following message in the output of the show logging log command: %DPVM-3-PSS_ERR: Failed to update Login info NPV contextpwwn: 50:00:00:00:aa:99:ee:44, syserr = no such pss key Workaround: This issue is resolved. • CSCta32005 Symptom: Upon receiving an OLS when a link went down, the OLS counter was not incremented. Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.2(1a) 44 OL-19964-02