HP Cisco MDS 9020 Cisco Nexus 5000 Series Hardware Installation Guide (OL-1590 - Page 42

Port Level LED’s, Supported SFP Transceivers, Location, Function, Color, Status, Description

Get HP Cisco MDS 9020 - Fabric Switch PDF manuals and user guides View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Nexus 5010 Switch Chapter 1 Product Overview Send documentation comments to [email protected] Table 1-6 LEDs for the Cisco Nexus 5010 Switch (continued) LED PSU Status Indicators Location Power supply (front) Function Color PSU Health Green (multi color) Amber GEM Cards back of chassis Health Indicator An indicator Green to show there is a fault with any one of Amber the GEM card Status OFF Solid On Solid On 1 Hz blinking OFF On Description No AC power to power supply Power supply on and OK Power supply failures, over voltage, over current, over temperature AC present, 3.3VSB on, PSU is off Operating normally GEM card is operating normally Solid on A fault has occurred on the GEM card. Port Level LED's There are twenty to twenty-six port activity LEd's on switch depending on whether the GEM is a Fibre Channel or 10GE. The table summarizes the behavior of the port LED's. Link State LED State Link Down OFF POST failed on port AMBER blinking yellow Administrative disabled AMBER_ON Link Up, port in STP forwarding state GREEN_ON Notes Depending on the product you look at, the LED could be off, or solid amber. Blinks based on network activity Supported SFP Transceivers The Cisco Nexus 5010 switch supports both SFP+ Ethernet transceivers and SFP Fibre Channel transceivers. 1-28 Cisco Nexus 5000 Series Hardware Installation Guide OL-15902-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Send documentation comments to [email protected]
1-28
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Chapter 1
Product Overview
Nexus 5010 Switch
Port Level LED’s
There are twenty to twenty-six port activity LEd’s on switch depending on whether the GEM is a Fibre
Channel or 10GE. The table summarizes the behavior of the port LED’s.
Supported SFP Transceivers
The Cisco Nexus 5010 switch supports both SFP+ Ethernet transceivers and SFP Fibre Channel
transceivers.
PSU Status
Indicators
Power supply
(front)
PSU Health
(multi color)
Green
OFF
No AC power to power supply
Solid On
Power supply on and OK
Amber
Solid On
Power supply failures, over volt-
age, over current, over temperature
1 Hz
blinking
AC present, 3.3VSB on,
PSU is off
OFF
Operating normally
GEM Cards
Health Indicator
back of chassis
An indicator
to show
there is a
fault with
any one of
the GEM
card
Green
On
GEM card is operating
normally
Amber
Solid on
A fault has occurred on
the GEM card.
Table 1-6
LEDs for the Cisco Nexus 5010 Switch (continued)
LED
Location
Function
Color
Status
Description
Link State
LED State
Notes
Link Down
OFF
POST failed on port
AMBER blinking yellow
Administrative disabled
AMBER_ON
Depending on the product you look at, the
LED could be off, or solid amber.
Link Up,
port in STP forwarding
state
GREEN_ON
Blinks based on network activity