HP Cisco MDS 9020 Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 24
Setting the date and time, Verifying Installed Licenses
View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Setting the date and time Date and time are used for logging events. Cisco MDS 9124e Fabric Switch operation does not depend on the date and time. A switch with an incorrect date and time value will function properly. To set the date and time using the CLI: 1. If you have not already done so, connect to the switch and log in as admin. 2. Issue the time and date command using the following syntax: switch# clock set where: • HH is the hour; valid values are 00 through 23. • MM is minutes; valid values are 00 through 59. • SS is seconds; valid values are 00 through 59. • DD is the date; valid values are 01 through 31. • YYYY is the year; valid values are 2000 through 2030. For example: switch# clock set 15:58:09 23 September 2002 HH represents hours in military format (15 for 3 p.m.), MM is minutes (58), SS is seconds (09), DD is the date (23), Month is the month in words (September), and YYYY is the year (2002). For details about changing time zones, see the clock command in the Cisco MDS 9000 Family CLI Configuration Guide. Verifying Installed Licenses To determine the type of licensing included with your Cisco MDS 9124e Fabric Switch, type show license usage at the command prompt using the following syntax: switch# show license usage For more information about the Command Line Interface (CLI), refer to the Cisco MDS 9000 Family CLI Configuration Guide. 24 Set Up