HP Cisco MDS 9120 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Rel - Page 21

Downgrading Your Cisco MDS SAN-OS Software Image Send documentation comments to [email protected] - IVR: With IVR enabled, you must follow additional steps if you are downgrading from Cisco SAN-OS Release 2.1.(1a), 2.1(1b), or 2.1.(2a). See the "Upgrading with IVR Enabled" section on page 15 for these instructions. - FICON: If you have FICON enabled, the downgrade path is different. See Table 8. - iSNS: The iSNS feature does not support a graceful downgrade from Cisco MDS SAN-OS Release 3.2(1a) to any earlier SAN-OS release. Prior to a downgrade from Cisco SAN-OS 3.2(1a), disable the MDS iSNS server and remove all configurations associated with the MDS iSNS client. Use Table 7 to determine your nondisruptive downgrade path from Cisco SAN-OS Release 3.2(1a). Find the SAN-OS image you want to downgrade to in the To SAN-OS Release column of the table and use the path recommended. Note The software downgrade information in Table 7 applies only to Fibre Channel switching traffic. Downgrading system software disrupts IP and SSM intelligent services traffic. Table 7 Nondisruptive Downgrade Path from SAN-OS Release 3.2(1a) To SAN-OS Release Nondisruptive Downgrade Path SAN-OS 3.2(1) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 3.1(4) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 3.1(3a) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 3.1(2b) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 3.1(2a) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 3.1(2) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 3.1(1) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 3.0(3a) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 3.0(3) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 3.0(2a) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 3.0(2) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 3.0(1) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 2.1(3) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 2.1(2e) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 2.1(2d) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 2.1(2b) You can nondisruptively downgrade directly from SAN-OS Release 3.2(1a). SAN-OS 2.1(2) Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.1(2). SAN-OS 2.1(1b) Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.1(1b). SAN-OS 2.1(1a) Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.1(1a). SAN-OS 2.0(4a) Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.0(4a). SAN-OS 2.0(4) Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.0(4). SAN-OS 2.0(3) Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.0(3). SAN-OS 2.0(2b) Downgrade to SAN-OS Release 2.1(2b) and then downgrade to Release 2.0(2b). OL-14116-02 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1a) 21