HP Cisco MDS 9124 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Rel - Page 24

Caveats Send documentation comments to [email protected] Table 9 Open Caveats and Resolved Caveats Reference (continued) DDTS Number Severity 3 CSCin95789 CSCsd21187 CSCse31881 CSCsg19148 CSCsg19303 CSCsh69086 CSCsh71985 Software Release (Open or Resolved) 3.1(2) 3.1(2a) O O O O O O O O O O O R O R Resolved Caveats • CSCsh69086 Symptom: Zone member configuration based on interface domain does not work correctly in Cisco MDS SAN-OS 3.1(1) and3.1(2) when you use CLI commands to configure interface-domain zones. Workaround: This issue is resolved. • CSCsh71985 Symptom: The Performance Manager in Cisco Fabric Manager does not collect and report the correct Fibre Channel flow statistics. Workaround: This issue is resolved. Open Caveats • CSCei82909 Symptom: The implementation of the Internet Key Exchange (IKE) version 2 in Cisco MDS 9000 switches may not be interoperable with other IKE version 2 implementations. Our IKE version 2 implementation is used whenever an encrypted FCIP tunnel is established between two MDS switches. Workaround: If a Cisco MDS 9000 switch tries to establish an IKE version 2 tunnel with a non-MDS switch running IKE version 2, or vice versa, the gateway or the Cisco MDS 9000 switch should be configured to use IKE version 1 for that tunnel. • CSCsh31236 Symptom: On a Cisco MDS 9513 Switch, when there are more than 512 ports on a single chassis, some ports with indexes between 0x200 and 0x20f may not come up. In addition, some ports with indexes between 0x0 and 0xf may show unexpected behavior when the ports with indexes between 0x200 and 0x20f are brought up. To display the port indexes, issue the show system internal fcfwd idxmap port-to-interface command. The port indexes appear in the column with the heading "glob idx." Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(2a) 24 OL-12208-03