HP Cisco MDS 9124 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Rel - Page 8

Software Download Process Send documentation comments to [email protected]. Selecting the Correct Software Image for an MDS 9100 Series Switch The system and kickstart image that you use for an MDS 9100 series switch depends on which switch you use, as shown in Table 2. Table 2 Software Image for MDS 9100 Series Switch Switch MDS 9120 or MDS 9140 MDS 9124, Cisco Fabric Switch for HP BladeSystem, or Cisco Fabric Switch for IBM BladeCenter Image Filename begins with m9100-s1ek9 Filename begins with m9100-s2ek9 Selecting the Correct Software Image for an MDS 9500 Series Switch The system and kickstart image that you use for an MDS 9500 Series switch depends on whether the switch is based on a Supervisor-1 module or a Supervisor-2 module, as shown in Table 3. Table 3 Software Image for Supervisor Type Supervisor Type Supervisor-1 module Supervisor-2 module Switch MDS 9506 and 9509 MDS 9506, 9509, and 9513 Image Filename begins with m9500-sf1ek9 Filename begins with m9500-sf2ek9 Use the show module command to display the type of supervisor module in the switch. For a Supervisor-1 module, the output might look like this: switch# show module Mod Ports Module-Type Model Status ... ... 5 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 active* 6 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 ha-standby For a Supervisor-2 module, the output might look like this: switch# show module Mod Ports Module-Type Model Status ... ... 7 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 active * 8 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 ha-standby Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(3) 8 OL-12208-05