HP Cisco MDS 9140 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 269

Chapter 10 Obtaining and Installing Licenses Installing Licenses Using Fabric Manager License Wizard Send documentation comments to [email protected] Installing Licenses Using Fabric Manager License Wizard To install licenses using the Fabric Manager License Wizard, follow these steps: Step 1 Step 2 Step 3 Log into a switch in the fabric containing the switches for which you want to install licenses. To install licenses on multiple switches, you do not need to log into each switch; however, the switches must be in the fabric you are viewing. Start the License Wizard by selecting Tools > Install >License. Or, you can select Licenses under Switches in the Physical Attributes pane. You see the license information in the Information pane, one line per feature. Click the Keys tab, and then click the License Install Wizard icon in the toolbar. Figure 10-2 License Install Wizard Icon Step 4 Step 5 Step 6 Step 7 You see the initial screen of the License Wizard. If you have already obtained the license key files, click the corresponding radio button and proceed to Step 6. Click I have the Product Authorization Key (PAK) if you have the authorization key. Select the vendor, from whom you purchased your switch, in the Vendor drop-down list. The License Server URL changes depending on the vendor you select. If your URL is different, or if you select Other as the vendor, enter the correct license server URL. Click Next to continue to the next screen (see Figure 10-3). Figure 10-3 License Install Wizard Dialog Box OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 10-11