HP Cisco MDS 9140 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 362

Reloading Modules Chapter 19 Managing Modules Send documentation comments to [email protected] Step 3 You see a list of modules contained in the selected switches. Click the Card Module Status tab. You see the information shown in Figure 19-2. Figure 19-2 Card Module Status Tab Step 4 Step 5 Check the Reset check box in the row of the switch to reload. Click the Apply Changes icon. Power Cycling Modules To power cycle any module using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Step 4 Step 5 Do one of the following in the Logical Domains pane: • Click SAN to display a list of all switches in the SAN. • Click one of the fabrics to display a list of switches for that fabric. • Click a VSAN to display a list of switches for that VSAN. Expand Switches and select Hardware from the Physical Attributes pane. Click the Card Module Status tab. Check the Reset check box in the row for the module(s) you want to reset. Click the Apply Changes icon. Caution Resetting a module disrupts traffic through the module. 19-6 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x