HP Cisco MDS 9216 Cisco MDS 9200 Series Hardware Installation Guide (OL-16188- - Page 73
Installing the Cisco MDS 9200 Series Rear-Facing in the Rack, Step 2
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 2 Installing the Cisco MDS 9200 Series Installing the Switch in a Cabinet with Insufficient Front Clearance Note Figure 2-13 shows the front rack-mount brackets as rotated. Your chassis may have these brackets installed in the normal position. Figure 2-13 Installing the Cisco MDS 9200 Series (Rear-Facing) in the Rack 1 Rear cabinet mounting rails Front cabinet mounting rails 3 1 2 MDS 9216i 3 4 5 6 7 8 9 10 11 12 13 14 LINK GE1 LINK GE2 116897 2 1 Mounting rail 2 Front rack-mount bracket 3 Screws, 12-24 or 10-32 Step 2 Step 3 From the front of the rack, position the longer slider rails with the ears away from the chassis and slide them into the C brackets previously installed on the sides of the chassis (see Figure 2-14). Level the chassis (it may sag slightly towards the back) and attach the slider rails to the mounting rails with the 12-24 x 3/4-in. or 10-32 x 3/4-in. screws, three per side. OL-16188-01 Cisco MDS 9200 Series Hardware Installation Guide 2-17