HP Cisco MDS 9216 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 993

Chapter 46 Configuring Port Security Port Security Activation Send documentation comments to [email protected] Step 5 Click the Control tab. You see the port security enable state for all switches in the selected VSAN (see Figure 46-7). Figure 46-7 Port Security Configuration Step 6 Step 7 Step 8 Set the Command column to enable for each switch in the VSAN. Click the CFS tab and set the Command column to commit on all participating switches in the VSAN. Click Apply Changes to distribute the enabled port security to all switches in the VSAN. Port Security Activation This section includes the following topics: • Activating Port Security, page 46-9 • Database Activation Rejection, page 46-10 • Forcing Port Security Activation, page 46-10 • , page 46-11 • Copying an Active Database to the Config Database, page 46-11 • Displaying Activated Port Security Settings, page 46-12 • Displaying Port Security Statistics, page 46-12 • Displaying Port Security Violations, page 46-12 Activating Port Security To activate port security using Fabric Manager, follow these steps: : Step 1 Step 2 Expand a VSAN and select Port Security in the Logical Domains pane. You see the port security configuration for that VSAN in the Information pane. Click the Actions tab. OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 46-9