HP Cisco MDS 9216 Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use
HP Cisco MDS 9216 - Fabric Switch Manual
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Cisco MDS 9216 manual content summary:
- HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 1
Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem user guide Part number: AA-RWEBA-TE Second edition: September 2007 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 2
notice information © Copyright 2007 Hewlett-Packard Development Company, L.P © Copyright 2007 Cisco Systems Inc. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 3
and time 24 Verifying Installed Licenses 24 Modifying the FC domain ID (optional 25 On Demand Ports 25 Disabling and enabling a port 25 Verifying the configuration 26 Backing up the configuration 26 Recovering the Admin Password 26 Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 3 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 4
and Electronic Equipment directive 42 English notice 42 B Electrostatic discharge 51 How to prevent electrostatic discharge 51 Grounding methods 51 C Switch technical specifications 53 General specifications 53 Weight and physical dimensions 54 Environmental requirements 55 4 Contents - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 5
Supported SFPs 55 Supported HBAs 55 Glossary 57 Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 5 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 6
6 Contents - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 7
About this guide This guide provides information about setting up and configuring the Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem. Throughout this guide the short product name is used, Cisco MDS 9124e Switch. Intended audience This guide is intended for system administrators and - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 8
United States, for contact options see the Contact HP United States web page: http://welcome.hp.com/country/us/en/contact_us.html • Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days directions could result in damage to equipment or data. 8 About This Guide - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 9
. Other HP web sites For additional information, see the following HP web sites: • http://www.hp.com • http://www.hp.com/go/storage • http://www.hp.com/service_locator • http://www.docs.hp.com • http://welcome.hp.com/country/us/en/prodserv/servers.html Cisco MDS 9124e Fabric Switch for HP c-Class - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 10
10 About This Guide - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 11
1 Overview The Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem (referred to hereafter as the Cisco MDS 9124e Fabric Switch) is a Fibre Channel (FC) switch that supports link speeds of up to 4 Gb. The Cisco MDS 9124e Fabric Switch can operate in a fabric containing multiple switches or as - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 12
Compatible with redundant and dual redundant switch configurations in c-Class BladeSystem • Hot code activation • Real-time clock • SFP port monitoring Component identification Figure 1 and Table 2 identify the physical components of the Cisco MDS 9124e Fabric Switch. 1 scale: 3/8" = 1" 20 19 18 17 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 13
• Redundant HP Onboard Administrator (OA) to ensure management access to the switch NOTE: The HP Onboard Administrator is the enclosure management module used to support and manage the HP c-Class BladeSystem and all managed devices used in the enclosure. Cisco MDS 9124e Fabric Switch for HP c-Class - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 14
Cisco Fabric Manager and Cisco Device Manager. IMPORTANT: Upgrade the Cisco MDS 9124e Fabric Switch by purchasing optional licenses. For more information, refer to the Cisco MDS 9000 Family CLI Configuration Guide. PortChannel PortChannel is included by default in the Cisco MDS 9124e Fabric Switch - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 15
Optional hardware kits Table 4 lists optional hardware kits that support the switch. For additional options, go to the HP web site: http://www.hp.com Table 4 Optional hardware Accessory Short wavelength 4Gb FC -B21 221691-B21 221692-B22 Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 15 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 16
16 Overview - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 17
the IP address • Configuring the switch • Recovering the admin password Shipping carton contents The Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem kit shipping carton contains three items, identified in Figure 3 and Table 5: • Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 18
The Cisco MDS 9124e Fabric Switch installs in the I/O bays in the rear of the HP c-Class BladeSystem enclosure. Refer to the HP BladeSystem c7000 Enclosure setup and installation guide for specific enclosure requirements. Installing multiple switches Install and configure one Cisco MDS 9124e Fabric - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 19
Handle latch 3 Installation handle released 4. Align the Cisco MDS 9124e Fabric Switch with the appropriate interconnect bay according to your enclosure's specific configuration. 5. Push firmly into the interconnect bay. See Figure 5. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 19 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 20
EXT 5 EXT 8 EXT 7 EXT 8 Cisco MDS 9124e 181737 Figure 5 Installing the Cisco MDS 9124e Fabric Switch into an interconnect bay 6. Press the installation handle into the latch to lock the switch in place. OA power verification As defined earlier, the HP BladeSystem Onboard Administrator (OA) is - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 21
cable from your computer to the serial port of the active OA. 4. Configure the terminal application as follows: • In a Windows environment: • Baud rate-9600 bits per second • 8 data bits • None (No parity) • 1 stop bit • No flow control Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 21 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 22
sure to use a strong password. You must explicitly configure a password that meets the requirements listed in the "Configuring User Accounts" section in the Cisco MDS 9000 Family CLI Configuration Guide. 9. Follow the instructions in the switch setup utility to configure the IP address, the netmask - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 23
Configuring the Switch The Cisco MDS 9124e Fabric Switch must be configured to ensure correct operation within a network and fabric. For instructions about configuring the switch to operate in a fabric containing switches from other vendors, refer to the HP StorageWorks SAN Design reference guide: - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 24
details about changing time zones, see the clock command in the Cisco MDS 9000 Family CLI Configuration Guide. Verifying Installed Licenses To determine the type of licensing included with your Cisco MDS 9124e Fabric Switch, type show license usage at the command prompt using the following syntax - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 25
enter the shutdown command: switch# config t switch(config)# interface ext1 switch(config-if)# shutdown The following shows how to enter the no shutdown command: switch# config t switch(config)# interface ext1 switch(config-if)# no shutdown Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 25 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 26
Occasionally, you may need to recover the admin password on the Cisco MDS 9124e Switch if the user does not have another user account on the switch with network-admin privileges. NOTE: Recovering the admin password requires a power-cycle of the switch. Configuration changes made since the last saved - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 27
user admin auth md5 switch(config)# exit switch(config)# copy run start Refer to the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 Family CLI Configuration Guide for detailed instructions. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 27 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 28
28 Set Up - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 29
supported by the Cisco MDS 9124e Switch, contact your HP representative. Table 8 Cisco MDS 9124e Switch management features Management tool CLI - Run up to two admin sessions and four user sessions simultaneously. For more information, refer to the Cisco MDS 9000 Family CLI Configuration Guide - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 30
204.1.1.12 192.168.65.12 Gateway 192.168.1.10 any, not self 192.168.1.10 192.168.1.10 Maintaining the Switch The Cisco MDS 9124e Switch does not require any regular physical maintenance. However, it is critical that environmental conditions, described in "Environmental considerations" are met - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 31
configuration using either the command-line interface (CLI) on the Cisco MDS 9124e Switch, Device Manager, or Fabric Manager. 2. Disconnect all external fibre channel cables from the Cisco MDS 9124e Switch. 3. Remove the Cisco MDS 9124e Switch from the c-Class enclosure. 4. Insert the new Cisco MDS - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 32
login. Refer to the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 Family CLI Configuration Guide for instructions. The following example shows the CLI commands: switch# config t switch(config)# snmp-server user admin auth md5 new password switch(config)# do copy - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 33
controlled by the OA and are used to indicate certain types of errors. The OA interface should be used to display all errors. See the HP BladeSystem Onboard Administrator user guide for information about the OA interface. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 33 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 34
, rebooted, or reset. During POST, the LEDs flash different colors. Any errors that occur during POST are listed in the error log. The Cisco MDS 9124e Switch performs POST when it is turned on or rebooted. Total boot time with POST is approximately three minutes. POST The success or failure results - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 35
configuration • Links initialized • The fabric is analyzed, and if any ports are connected to other switches, the switch participates in a fabric configuration • The switch messages, refer to the Cisco MDS 9000 Family System Messages Guide. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 35 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 36
36 Managing the Switch - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 37
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in to maintain compliance with FCC Rules and Regulations. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 37 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 38
the product. The Regulatory Model Number for the switch is: HSTNS-1B10 Laser device All HP systems equipped with a laser device comply with device other than those specified herein. • Allow only HP authorized service technicians to repair the laser device. Certification and classification - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 39
Harmonics • EN61000-3-3 (IEC61000-3-3) - Power Line Flicker • EN60950 (IEC60950) - Product Safety • Also approved under UL 60950/CSA C22.2 No. 60950-00, Safety of Information Technology Equipment. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 39 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 40
BSMI notice Japanese notice Korean notices 40 Regulatory compliance and safety - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 41
or proper disposal, contact an HP authorized service provider. WARNING! Your switch contains an internal lithium manganese recovery marks on the batteries used in sales, givaway, or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Cisco MDS 9124e Fabric Switch for HP - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 42
Japanese power cord statement Waste Electrical and Electronic Equipment directive English notice Dutch notice Verwijdering van afgedankte apparatuur door privé-gebruikers in de Europese Unie Dit symbool op het product of de verpakking geeft aan dat dit product niet mag worden gedeponeerd bij het - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 43
ää terveyshaitat ja suojelee luontoa. Lisätietoja paikoista, joihin hävitettävät laitteet voi toimittaa kierrätettäväksi, saa ottamalla yhteyttä jätehuoltoon tai liikkeeseen, josta tuote on ostettu. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 43 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 44
d'informations sur les centres de collecte et de recyclage des appareils mis au rebut, veuillez contacter les autorités locales de votre région, l es services de collecte des ordures ménagères ou le magasin dans lequel vous avez acheté ce produit. German notice Entsorgung von Altgeräten aus privaten - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 45
jtés pontos helyér l b vebb tájékoztatást a lakhelye szerint illetékes önkormányzattól, az illetékes szemételtakarító vállalattól, illetve a terméket elárusító helyen kaphat. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 45 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 46
Italian notice Smaltimento delle apparecchiature da parte di privati nel territorio dell'Unione Europea Questo simbolo presente sul prodotto o sulla sua confezione indica che il prodotto non può essere smaltito insieme ai rifiuti domestici. È responsabilità dell'utente smaltire le apparecchiature - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 47
e a saúde das pessoas. Para obter mais informações sobre locais que reciclam esse tipo de material, entre em contato com o escritório da HP em sua cidade, com o serviço de coleta de lixo ou com a loja em que o produto foi adquirido. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 47 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 48
Slovakian notice Slovenian notice Spanish notice Eliminación de residuos de equipos eléctricos y electrónicos por parte de usuarios particulares en la Unión Europea Este símbolo en el producto o en su envase indica que no debe eliminarse junto con los desperdicios generales de la casa. Es - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 49
ditt lokala kommunkontor, din närmsta återvinningsstation för hushållsavfall eller affären där du köpte produkten för att få mer information om var du kan lämna ditt avfall för återvinning. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 49 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 50
50 Regulatory compliance and safety - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 51
• Use conductive field service tools. • Use a portable field service kit with a folding HP authorized reseller install the part. NOTE: For more information on static electricity, or for assistance with product installation, contact your HP authorized reseller. Cisco MDS 9124e Fabric Switch for HP - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 52
52 Electrostatic discharge - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 53
Supported HBAs • Supported SFPs General specifications Table 13 lists general specifications for the Cisco MDS 9124e Switch. Table 13 General specifications Specification Description Configurable EN5022 Level A • EN50082-2/EN55024: 1998 Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 53 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 54
as input port speed increases and becomes disparate from output port speed. Weight and physical dimensions Table 14 lists physical properties. Table 14 Switch physical dimensions Dimension Height Width Measurement 29.3 mm (1.15 in) 208 mm (8.19 in) Depth 280 mm (11.02 in) Weight 1.27 kg - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 55
html Supported HBAs For a list of HBAs that have been tested and are known to work with the SAN switches, refer to the latest version of the HP StorageWorks SAN design reference guide: http://h18000.www1.hp.com/products/storageworks/san/documentation.htm Cisco MDS 9124e Fabric Switch for HP c-Class - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 56
56 Switch technical specifications - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 57
every data frame. data word A type of transmission word that occurs within frames. The frame header, data field, and CRC all consist of data words. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 57 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 58
fabric. Usually assigned by the principal switch, but can be assigned manually. The domain ID for an HP switch can be any integer between 1 and 239. The default domain ID is usually 1. Error-detect time-out value. The minimum time a target waits for a sequence to complete before initiating recovery - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 59
bit, byte, and word synchronization. The fabric created by connecting multiple HP switches with multiple ISL cables, and configuring the switches to handle traffic as a seamless group. the processor's memory space. Also called user flash. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 59 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 60
. Long wavelength. A type of fiber optic cabling that is based on 1300 mm lasers and supports link speeds up to 2 Gb/s. May also refer to the type of transceiver. See also . Used to connect an equipment port to the fabric in a loop configuration through an FL_Port. See also node. 60 Glossary - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 61
NL_Port that logs in to the fabric, can function within a public or private loop, and can communicate with private or public NL_Ports. See also private loop. quad A group of four adjacent ports that share a common pool of frame buffers. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 61 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 62
to the server and are fault tolerant through mirroring or parity checking. The rate at which requests arrive at a servicing entity. With respect to a fabric, the communication path between two switches. May also apply to the specific path taken by an individual frame from source to destination. The - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 63
also defined zone configuration, enabled zone configuration. zone configuration A specified set of zones. Enabling a configuration enables all zones in that configuration. See also defined zone configuration,enabled zone configuration. Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 63 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 64
64 Glossary - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 65
replacing 30 supported 15 SFPs, supported 55 shipping carton contents 17 SNMP 29 specifications environmental 55 supported HBAs 55 supported SFPs 55 switch components 12 configuring 23 enabling and disabling ports 25 features 11 installing 18 Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 66
maintenance 30 management 29 replacement 31 setting the date and time 24 setting the IP address 21 symbols in text 8 T text symbols 8 66 Index - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 67
Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 67 - HP Cisco MDS 9216 | Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Use - Page 68
68 Index
Cisco MDS 9124e Fabric Switch for
HP c-Class BladeSystem
user guide
Part number: AA-RWEBA-TE
Second edition: September 2007