HP Cisco MDS 9216A Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 54
x45F0 corresponds to HPUX's Volume Set Address <VBUS ID: 0xB, Target ID: 0xE, LUN: 0x0>.
View all HP Cisco MDS 9216A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Caveats Send documentation comments to [email protected] • CSCso63465 Symptom: FCP-CMD (for example, Inquiry) frames targeted to LUN 0x45F0 or LUN 0x50F0 are dropped by an MDS switch when traffic flows (egresses) through Generation 2 modules. LUN 0x45F0 corresponds to HPUX's Volume Set Address . Workaround: This issue is resolved. • CSCso66705 Symptom: The FCNS process may fail and dump a core. The process is then gracefully restarted by the system. Because this condition takes a relatively long time to develop, it is unlikely that the FCNS process will fail frequently enough to cause the active supervisor to reboot. Workaround: This issue is resolved. • CSCso87408 Symptom: A scheduled web report fails to generate when the fabric is deleted from Fabric Manager. The log records "Fabric not found fabricID=xxx". Workaround: This issue is resolved. • CSCsq54455 Symptom: On a DS-X9032 module where the SRAM parity error was seen, the SRAM parity error exceptions were logged continuously. Workaround: This issue is resolved. • CSCsq57352 Symptom: After upgrading from Fabric Manager Release 3.0(2a) to Fabric Manager Release 3.2(3a), the Fabric Manager client fails to reuse the map layout files produced by Release 3.0(2a). Renaming the map layout files will make them compatible with Fabric Manager Release 3.2(3a). Workaround: This issue is resolved. • CSCsq60582 Symptom: Multiple Cisco products contain either of two authentication vulnerabilities in the Simple Network Management Protocol Version 3 (SNMPv3) feature. These vulnerabilities can be exploited when processing a malformed SNMPv3 message. These vulnerabilities could allow the disclosure of network information or may enable an attacker to perform configuration changes to vulnerable devices. The SNMP server is an optional service that is disabled by default. Only SNMPv3 is impacted by these vulnerabilities. Note SNMP versions 1, 2 and 2c are not impacted by these vulnerabilities. The United States Computer Emergency Response Team (US-CERT) has assigned Vulnerability Note VU#878044 to these vulnerabilities. Common Vulnerabilities and Exposures (CVE) identifier CVE-2008-0960 has been assigned to these vulnerabilities. This advisory is posted at http://www.cisco.com/en/US/products/products_security_advisory09186a00809ac83b.shtml. Workarounds are available for mitigating the impact of the vulnerabilities described in this document. Workaround: This issue is resolved. Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(1b) 54 OL-17675-02