HP Cisco MDS 9216i Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Re - Page 38
Workaround, Symptom
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Caveats Send documentation comments to [email protected] Workaround: This issue is resolved. • CSCsq27248 Symptom: If some database processes are shut down uncleanly (for example, the host crashes or a process is killed) the following message may be seen: com.cisco.dcbu.lib.rrd.core.RrdException: Bad sample timestamp 1210312407. Last update time was 9221120237041090560, at least one second step is required This means that an RRD file has been corrupted. Workaround: This issue is resolved. • CSCsq40292 Symptom: The Control Virtual Target (CVT) creation fails. Workaround: This issue is resolved. • CSCsr08325 Symptom: The Fabric Manager web client shows Fabric Events with the next description: VSAN ... zone activation success, local switch is 00:00:00:00:00:00:00:00 This issue might occur if the enhanced zone mode is configured for a VSAN. Workaround: This issue is resolved. • CSCsr15094 Symptom: If the KMC response comes back with a failure after 10 seconds, it might get stuck in a locked state. Workaround: This issue is resolved. • CSCsq94831 Symptom: Typing the Nexus 5000 switch IP address in the browser address bar shows a download page which says Cisco Device Manager for MDS 9000 Series Workaround: This issue is resolved. • CSCsu27719 Symptom: PostgreSQL does not shutdown unless it can close all the connections it has. Usually it does not shutdown because it has a connection with Fabric Manager Server. Workaround: This issue is resolved. • CSCsu26064 Symptom: When running Fabric Manager 3.2(3) and SAN-OS 3.2(3), go to Fabric Manager > Physical Devices Panel > End Devices > Hosts. The panel that displays in the top right showing the Nx ports does not display all fields for 4GB Qlogic modules. It does not show Model, Firmware or Driver for 4GB Qlogic cards. 2GB Qlogic modules for same switch and FM, show Model, Firmware and Driver. If you look in Device Manager > FC > Name Server > Advanced tab. In the SymbolicNodeName column you can see HPAE311A FW:v4.00.23 DVR:v9.1.3.16 for the card that does not display correctly in Fabric Manager. On the switch, if you enter show fcns data detail command you can see the symblic-node-name for the missing HBA VSAN:10 FCID:0x0a0011 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(2) 38 OL-14116-10