HP Cisco MDS 9216i Cisco MDS 9000 Family Fabric Manager Quick Configuration Gu - Page 35
Configuration Options, FM Server Port, Use HTTPS Web Server, server.bindaddrs, wrapper.app.parameter.4
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 3 Installing Fabric Manager Installing Fabric Manager Send documentation comments to [email protected] You see the Configuration Options dialog box for Fabric Manager Server shown in Figure 3-7. Figure 3-7 Configuration Options Dialog Box Step 18 Select the local interface, web server port or fm server port and check the FC Alias and SNMPv3 check boxes as desired and click Install if you are installing Fabric Manager Server. Note You can change the FM Server Port number, to a port that is not used by any other application. Note If you check the Use HTTPS Web Server check box, the Web Server Port field is grayed out and the default port is 443. Note If you select a specific IP address during installation and change the server host IP address, you must modify the following two files which are all located in the $INSTALL/conf directory. Change server.bindaddrs to the new IP address in the server.properties file and change wrapper.app.parameter.4 to the new IP address in the FMServer.conf file. Step 19 Click Cancel to stop the installation. You see the installation progress in the Cisco Fabric Manager Installer window shown in Figure 3-8. OL-7765-06 Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide 3-9