HP Cisco MDS 9222i HP StorageWorks C-Series Fabric Switches for SAN-OS 3.1(2a) - Page 9
Switch Settings for HP Continuous Access Enterprise, Virtual Arrays and HP Data Replication Manager
View all HP Cisco MDS 9222i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Switch Settings for HP Continuous Access Enterprise Virtual Arrays and HP Data Replication Manager for Modular Arrays The default load balancing policy for SAN-OS is Src-ID/Dst-ID/OX-ID. This must be changed when using Enterprise Virtual Array families or Modular Array families configured for Continuous Access EVA and/or Data Replication Manager (DRM). Change the default load balance setting to Src-ID/Dst-ID using either one of the following two procedures: Note: The MDS 9020 only supports Src-ID/Dst-ID. Using the Management Console or Telnet to Change the Load Balancing Setting Use the following procedure to change the load balance setting to Src-ID/Dst-ID with management console or telnet: Note: Your login account must have network-admin privileges to complete this procedure. 1. Log into the switch using either the management console or telnet. 2. Enter your network-admin privileged account by entering your login name and password. switch login: admin Password: 3. Enter the following to enter configuration mode: switch# config terminal 4. Enter the following command to enter the VSAN database: switch(config)# vsan database 5. Enter the following command to enable the VSAN(s) that contain the Continuous Access EVA and/or DRM fabric to src-dst-id loadbalancing: switch(config-vsan-db)# vsan loadbalancing src-dst-id switch(config-vsan-db)# exit switch(config)# exit 6. Verify that src-dst-id is enabled for the desired VSAN by entering the following command: switch# show vsan In the following example, VSAN 1 loadbalancing is set to src-id/dst-id switch# show vsan 1 vsan 1 information name: vsan1 state: active interoperability mode: default loadbalancing: src-id/dst-id operational state: up 9 MDS Multilayer Director & Multilayer Fabric Switches Release Notes