HP Cisco MDS 9222i Cisco MDS 9000 Family CLI Configuration Guide, Release 3.x - Page 476

Configuring the Command Scheduler Chapter 18 Scheduling Maintenance Jobs Send documentation comments to [email protected] Step 3 Command switch(config-schedule)# job name addMemVsan99 Step 4 switch(config-schedule)# time start 2004:12:14:23:00 switch(config-schedule)# no time Purpose Assigns a predefined job name (addMemVsan99) for this schedule. Specifies a one-time execution on December 14, 2004, at 11 p.m. Deletes the time assigned for this schedule. Verifying Scheduler Configuration To display the scheduler configuration, use the show scheduler config command. switch# show scheduler config config terminal scheduler enable scheduler logfile size 512 end config terminal scheduler job name addMemVsan99 config terminal vsan database vsan 99 interface fc1/1 vsan 99 interface fc1/2 vsan 99 interface fc1/3 vsan 99 interface fc1/4 end config terminal scheduler schedule name configureVsan99 time start 2004:8:10:9:52 job name addMemVsan99 end Deleting a Schedule To delete a schedule, follow these steps: Step 1 Step 2 Command switch# conf t switch(config)# switch(config)# no scheduler schedule name weekendbackup Purpose Enters the configuration mode. Deletes the defined schedule. 18-8 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x