HP Cisco MDS 9222i Cisco MDS 9100 Series Hardware Installation Guide (OL-17951 - Page 21
Cisco MDS 9100 Series Ports, Ports on the Cisco MDS 9134 Switch
View all HP Cisco MDS 9222i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 1 Product Overview Cisco MDS 9100 Series Ports Send documentation comments to [email protected] Caution The Cisco MDS 9000 Family has internal temperature sensors that are capable of shutting down the system if the temperature at different points within the chassis exceed certain safety thresholds. To be effective, the temperature sensors require the presence of airflow; therefore, in the event a fan module is removed from the chassis, the Cisco MDS 9140 Switch and the Cisco 9120 Switch will shut down after five minutes to prevent potentially undetectable overheating. However, the switches will shut down sooner if the higher-level temperature threshold is exceeded. For normal operation, the Cisco MDS 9124 Switch requires four fans. When fewer than four fans are operating on the Cisco MDS 9124 Switch, the switch will shut down. Except for the Cisco MDS 9134 Switch, the fan modules each have one Status LED. The Cisco MDS 9134 Switch fan modules do not have a Status LED. Fan module status is also indicated on a front panel LED. Procedures for replacing and installing the fan modules are available in the "Removing and Installing Components" section on page 2-26. Cisco MDS 9100 Series Ports The Cisco MDS 9100 Series provides host, target, and Inter-Switch Link (ISL) connectivity. Ports on the Cisco MDS 9134 Switch The Cisco MDS 9134 Switch provides up to 32 autosensing and autonegotiating Fibre Channel ports capable of speeds of 1, 2, and 4 Gbps. The first 24 ports are licensed by default. On-Demand Port Activation Licensing allows expansion to 32 ports, with additional ports available as an 8-port group. The Cisco MDS 9134 Switch also offers two 10-Gbps ports. Table 1-1 shows the mapping of ports to port groups. Table 1-1 Port Group Mapping on the Cisco MDS 9134 Switch Ports Front panel fc1/1-4 Front panel fc1/5-8 Front panel fc1/9-12 Front panel fc1/13-16 Front panel fc1/17-20 Front panel fc1/21-24 Front panel fc1/25-28 Front panel fc1/29-32 10-Gbps ports Port Group Port group 0 Port group 1 Port group 2 Port group 3 Port group 4 Port group 5 Port group 6 Port group 7 Port group 8 and 9 OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 1-7