HP Color LaserJet 5550 HP Color LaserJet 5550 Printer Series - Certificate of - Page 1
HP Color LaserJet 5550 Manual
View all HP Color LaserJet 5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Model: HP CLJ 5550n HP CLJ 5550dn HP CLJ 5550dtn HP CLJ 5550hdn Hewlett-Packard Certificate of Volatility Part Number: Address: Hewlett-Packard Company Q3714A 11311 Chinden Blvd Q3715A Boise, ID 83714 Q3716A Q3717A Volatile Memory Does the device contain volatile memory (Memory whose contents are lost when power is removed)? Yes No If Yes please describe the type, size, function, and steps to clear the memory below Type (SRAM, DRAM, etc): Size: Function: Steps to clear memory: SDRAM DDR 128 MB n print job specific information, and turn unit off, power unit back on and dn information stored in RAM disk 256 MB dtn and hdn Type (SRAM, DRAM, etc): Size: Function: Steps to clear memory: SDRAM 32 MB Pageframe video memory N/A Type (SRAM, DRAM, etc): Size: Function: Steps to clear memory: Non-Volatile Memory Does the device contain non-volatile memory (Memory whose contents are retained when power is removed)? Yes No If Yes please describe the type, size, function, and steps to clear the memory below Type (Flash, EEPROM, etc): Size: Function: Steps to clear memory: Compact Flash 32 MB Printer Firmware. Perform a cold reset as explained in the service manual. Type (Flash, EEPROM, etc): Size: Function: Steps to clear memory: EEPROM (NVRAM) 16K Formatter PCA: page count, Perform a cold reset as explained in configuration, PCA options, etc the service manual. Type (Flash, EEPROM, etc): Size: Function: Steps to clear memory: Mass Storage Does the device contain mass storage memory (Hard Disk Drive, Tape Backup)? Yes No If Yes please describe the type, size, function, and steps to clear the memory below Type (HDD, Tape, etc): Size: Function: Steps to clear memory: Embedded HDD (hdn bundle 20 GB Job, font, forms storage 1. Turn the printer on. only) 2. As the printer performs the memory count as part of its power-on sequence, press and hold the Menu button until all three lights on the control panel are lit. Release the Menu button. 3. Press the Reverse Arrow button. The message INITIALIZE DISK displays on the control panel. 4. Press and release the check mark button. The printer initializes the hard disk and continues its power-on sequence. Type (HDD, Tape, etc): Size: Function: Steps to clear memory: HDD optional all others 20 GB Job, font, forms storage 1. Turn the printer on. 2. As the printer performs the memory count as part of its power-on sequence, press and hold the Menu button until all three lights on the control panel are lit. Release the Menu button. 3. Press the Reverse Arrow button. The message INITIALIZE DISK