HP Color LaserJet CM4730 HP LaserJet MFP and Color MFP Products - Configuring - Page 54
Default Settings
View all HP Color LaserJet CM4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 5: Default Settings: This chapter lists the default setting for each configuration in the checklist: Setting Configure SNMPv3 (Security page). Configure Bootloader password. Configure ACL (Network page). Disable Allow Web Server (HTTP) Access. Enable Job Retention. Configure Job Hold Timeout. Configure Fax Printing. Establish PIN Number. Configure Enable Mode to Store All Received Faxes. Configure Default From Address. Select Prevent user from changing the Default From Address. Configure Accessing LDAP Server settings (if available on your network). Configure LDAP Server Bind Method to Simple over SSL (if possible). Upload SSL Certificate (if available). Configure Time-outs to Delay before resetting the default settings, and type a number of seconds to delay. Configure Embedded Web Server Password. Configure Embedded Web Server Configuration options. Enable Outgoing Mail. Disable Incoming Mail. Disable Cancel Job Button. Disable Go Button. Disable Command Invoke. Disable Command Download. Disable Command Load and Execute. Enable Continue Button. Disable Print Service. Default Setting Not configured Not configured Not configured Enabled Enabled Never Delete Not configured Note configured Print All Received Faxes Not configured Not selected Not configured Simple Not applicable Not configured Delay default: 20 seconds Not configured (See below) Enabled Disabled Disabled Enabled Enabled Enabled Enabled Enabled Enabled HP LaserJet and Color LaserJet MFP Security Checklist 54