HP DC5100 HP Compaq Business Desktop dc5100 Service Reference Guide, 2nd Editi - Page 180
Run Computer Setup. If Setup already, Run Computer Setup and Diagnostic
UPC - 072000919491
View all HP DC5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
POST Error Messages Screen Message 2000-Master Boot Record Hard Drive has Changed. Invalid Electronic Serial Number. Network Server Mode Active and No Keyboard Attached Parity Check 2. Probable Cause The current bootable hard drive is not the same as the one that was present when MBR security was enabled. Electronic serial number has become corrupted. Keyboard failure while Network Server Mode enabled. Parity RAM failure. Recommended Action Run Computer Setup and either disable MBR security or save the MBR of the current bootable disk. Run Computer Setup. If Setup already has data in the field or will not allow the serial number to be entered, download from http://www.hp.com and run SP5572.EXE (SNZERO.EXE). Run Computer Setup and try to enter serial number under Security, System ID, then save changes. Reconnect keyboard with computer turned off. Check connector for bent or missing pins. Ensure that none of the keys are depressed. Replace keyboard. Run Computer Setup and Diagnostic utilities. C-6 376220-001 Service Reference Guide, dc5100