HP DL160 HP StorageWorks All-in-One Storage Manager user guide (452695-004, No - Page 11
Resetting iSCSI connections, All-in-One Storage Manager
UPC - 883585847174
View all HP DL160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
NOTE: Any existing iSCSI connections must be reset before changes take effect. Resetting iSCSI connections If you use the Storage Networks dialog box to configure a preferred private storage network for iSCSI traffic and there are one or more existing iSCSI connections on the system, the new setting will not take effect until the existing connections are reset through iSCSI Initiator on the connected systems. To reset an iSCSI connection: 1. On the system that contains the iSCSI initiator whose connection has been changed, open Microsoft iSCSI Initiator. 2. On the Persistent Targets tab, select the iSCSI target that resides on your HP Storage Server and then click Remove. 3. On the Targets tab, select the iSCSI target that resides on your HP Storage Server and then click Details. 4. Select the target identifier from the list, click Log off, and then click OK. 5. On the Discovery tab, under Target Portals select the IP address that was previously designated for iSCSI traffic between the application server and the HP Storage Server and click Remove. 6. Click Add. In the IP address or DNS name field, type the IP address that was enabled for iSCSI traffic in the All-in-One Storage Networks dialog box and then click OK. 7. On the Targets tab, click Log On. 8. Check the Automatically restore this connection when the system boots check box and then click OK. 9. Click OK to close the iSCSI Initiator Properties dialog box. All-in-One Storage Manager 11