HP DL580 3-7U Quick Deploy Rail System Installation Instructions - Page 1

HP 3-7U Quick Deploy Rail System Installation Instructions for HP products Overview This rack hardware kit supports a variety of 3-7U HP products in round-, square-, or threaded-hole racks. Use the legend to identify installation steps appropriate to the type of rack. IMPORTANT: If you are shipping the server installed in a rack, see the additional instructions located in "Preparing the product for rack relocation or integrated shipping" before proceeding. Hardware kit contents © Copyright 2005-2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. June 2006 (Third Edition) Part Number 378950-003 In addition to the supplied items, you may need: • Screws that fit a threaded-hole rack • The appropriate screwdriver for the screws • Kit 371482-B21 for integrated shipping a round-hole rack Rack warnings WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that: • The leveling jacks are extended to the floor.