HP Dc5700 Computer Setup (F10) Utility Guide - dc5700 Models - Page 13

Option, Description, Smart Card Options, Setup Password, Power-On Password, Restart from Windows,

Page 13 highlights

Computer Setup-Security NOTE Support for specific Computer Setup options may vary depending on the hardware configuration. Table 4 Computer Setup-Security Option Smart Card Options (some models) Setup Password Description Allows you to enable/disable the Smart Card to be used in place of the Power-On Password. Allows you to set and enable setup (administrator) password. NOTE If the setup password is set, it is required to change Computer Setup options, flash the ROM, and make changes to certain plug and play settings under Windows. Power-On Password See the Troubleshooting Guide on the Documentation and Diagnostics CD for more information. Allows you to set and enable power-on password. The power-on password prompt appears after a power cycle. If the user does not enter the correct power-on password, the unit will not boot. NOTE This password does not appear on warm boots , such as Ctrl + Alt + Delete or Restart from Windows, unless enabled in Password Options, below. See the Troubleshooting Guide on the Documentation and Diagnostics CD for more information. Password Options Allows you to: (This selection appears ● only if a power-on password or setup ● password is set.) ● Lock legacy resources (appears if a setup password is set) Enable/disable network server mode (appears if a power-on password is set) Specify whether the password is required for warm boot (Ctrl + Alt + Delete) (appears if a poweron password is set) ● Enable/Disable Setup Browse Mode (appears if a setup password is set) (allows viewing, but not changing, the F10 Setup Options without entering setup password) See the Desktop Management Guide on the Documentation and Diagnostics CD for more information. Embedded Security Allows you to: (This menu item only ● appears after the Embedded Security ● Device is made available under Device Security.) ● ● Enable/disable the Embedded Security device Reset the device to Factory Settings Enable/disable power-on authentication support. (some models) Reset authentication credential. (some models) This feature is supported on some models only. See the Desktop Management Guide on the Documentation and Diagnostics CD for more information. Device Security Allows you to set Device Available/Device Hidden for ● Serial ports ● Parallel port ● All USB ports ● Front USB ports ENWW Computer Setup (F10) Utilities 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

Computer Setup—Security
NOTE
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 4
Computer Setup—Security
Option
Description
Smart Card Options
(some models)
Allows you to enable/disable the Smart Card to be used in place of the Power-On Password.
Setup Password
Allows you to set and enable setup (administrator) password.
NOTE
If the setup password is set, it is required to change Computer Setup options, flash
the ROM, and make changes to certain plug and play settings under Windows.
See the
Troubleshooting Guide
on the
Documentation and Diagnostics CD
for more information.
Power-On Password
Allows you to set and enable power-on password. The power-on password prompt appears after a
power cycle. If the user does not enter the correct power-on password, the unit will not boot.
NOTE
This password does not appear on warm boots , such as
Ctrl
+
Alt
+
Delete
or
Restart from Windows
, unless enabled in
Password Options
, below.
See the
Troubleshooting Guide
on the
Documentation and Diagnostics CD
for more information.
Password Options
(This selection appears
only if a power-on
password or setup
password is set.)
Allows you to:
Lock legacy resources (appears if a setup password is set)
Enable/disable network server mode (appears if a power-on password is set)
Specify whether the password is required for warm boot (
Ctrl
+
Alt
+
Delete
) (appears if a power-
on password is set)
Enable/Disable Setup Browse Mode (appears if a setup password is set) (allows viewing, but
not changing, the F10 Setup Options without entering setup password)
See the
Desktop Management Guide
on the
Documentation and Diagnostics CD
for more
information.
Embedded Security
(This menu item only
appears after the
Embedded Security
Device is made available
under Device Security.)
Allows you to:
Enable/disable the Embedded Security device
Reset the device to Factory Settings
Enable/disable power-on authentication support. (some models)
Reset authentication credential. (some models)
This feature is supported on some models only. See the
Desktop Management Guide
on the
Documentation and Diagnostics CD
for more information.
Device Security
Allows you to set Device Available/Device Hidden for
Serial ports
Parallel port
All USB ports
Front USB ports
ENWW
Computer Setup (F10) Utilities
7