HP Dc7600 Computer Setup (F10) Utility Guide - Page 9
Save Current Settings as Default, Restore Factory Settings as Default, Diskette Type, Drive
View all HP Dc7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Description File (continued) Default Setup Save Current Settings as Default Saves the current system configuration settings as the default. Restore Factory Settings as Default Restores the factory system configuration settings as the default. Apply Defaults and Exit Applies the currently selected default settings and clears any established passwords. Ignore Changes and Exit Exits Computer Setup without applying or saving any changes. Save Changes and Exit Saves changes to system configuration or default settings and exits Computer Setup. Storage Device Configuration Lists all installed BIOS-controlled storage devices. When a device is selected, detailed information and options are displayed. The following options may be presented. Diskette Type Identifies the highest capacity media type accepted by the diskette drive. Legacy Diskette Drives Options are 3.5" 1.44 MB and 5.25" 1.2 MB. Drive Emulation Allows you to select a drive emulation type for a certain storage device. (For example, a Zip drive can be made bootable by selecting diskette emulation.) ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. Computer Setup (F10) Utility Guide www.hp.com 5