HP Dc7800 Technical Reference Guide: HP Compaq dc7800 Series Business Desktop - Page 82
SFF Power Distribution
UPC - 883585764365
View all HP Dc7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Power and Signal Distribution Table 7-1 lists the specifications of the external supply. Table 7-1. USDT 135-Watt Power Supply Unit Specifications Parameter Input Line Voltage Range Line Frequency Input Current, Maximum load @ 90 VAC Output Voltage Output Current, nominal load Output Current, maximum load Output Current, peak load (300 ms max) [1] 90-265 VAC 47-63 Hz 2.2 A 19.0 VDC 3.0 A 7.1 A 9.0 A NOTES: Total continuous power should not exceed 135 watts. Total surge power (
7-2
www.hp.com
Technical Reference Guide
Power and Signal Distribution
Table 7-1 lists the specifications of the external supply.
NOTES:
Total continuous power should not exceed 135 watts. Total surge power (<10 seconds w/duty cycle < 5 %) should not exceed
170 watts.
[1] Using 100 VAC input. The output voltage is allowed to drop to a minimum of 15 VDC during the transient period.
7.2.2 SFF Power Distribution
The SFF form factor uses a power supply unit internal to the system chassis. Figure 7-2 shows
the block diagram for power generation in the SFF.
Figure 7-2. SFF Power Generation, Block Diagram
Table 7-2 lists the specifications of the SFF power supply unit.
Table 7-1.
USDT 135-Watt Power Supply Unit Specifications
Parameter
Input Line Voltage Range
90–265 VAC
Line Frequency
47–63 Hz
Input Current, Maximum load @ 90 VAC
2.2 A
Output Voltage
19.0 VDC
Output Current, nominal load
3.0 A
Output Current, maximum load
7.1 A
Output Current, peak load (300 ms max) [1]
9.0 A
System Board
Power Supply
Power On
CPU, slots, Chipsets, Logic,
Front Bezel
& Voltage Regulators
Unit
Fan
PS On
+5 VDC
+12 VccP
Power Button
Spd [1]
+12 VDC
-12 VDC
+3.3 VDC
Drives
+3.3 VDC
+5 VDC
+12 VDC
90 - 264 VAC
NOTE:
[1] Not present on CMT.
5 AUX