HP DesignJet 3000 HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - - Page 86
to replace the ink systems, If you don't correct the error now, you will see the status message Ink
View all HP DesignJet 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Imaging inks YES→ installed NO→ Incorrect ink system → After you have finished installing a new ink cartridge, you are asked to confirm that you have changed the type of ink cartridges from UV Pigmented to Imaging. Press ↑ to confirm that you have changed the ink cartridges from UV Pigmented to Imaging. Press ↓ to indicate that you have not changed the ink cartridges from UV Pigmented to Imaging. You will then be given the opportunity of replacing the incorrect ink cartridges by the correct ones. After you used the Replace Ink System procedure, which was cancelled by a time-out or aborted (see ), the printer has detected that one or more of the ink systems are still faulty or have not been fully replaced, as indicated by the flashing squares. This message also appears if the printer believes that a component is incorrect; you must then confirm that the ink system is indeed correct, or rectify the error. Press ↓ to continue, to replace the ink systems. Printing will be disabled. You should replace the faulty ink systems immediately; see page 74, If You Have Problems Reseating a Printhead. If you don't correct the error now, you will see the status message "Ink system error" described on page 89. 86